Get in touch with Yibo Company
DD
Marine Deck Levelling: A Project Input Guide for Compound Quotes
Updated September 2026 Marine deck leveling compound is used to form a controlled layer in a marine floor build-up, but quotations can’t be compared when bidders receive only a deck region and one nominal thickness. The bidder is then forced…
Self Leveling Marine Screed vs Trowel-Applied Underlay: Which Fits the Job?
Updated September 2026 Self leveling marine screed is a flowable underlay route used to create a generally flat receiving surface within a bounded deck zone. Trowel-applied underlays are shaped deliberately around falls, penetrations, and controlled transitions; cement-system labour remains product-…
Naval Vessel Flooring Guide: From Duty Map to Handover
Updated September 2026 Naval vessel flooring is the complete, location-specific marine flooring build-up accepted for a defined compartment and service condition. Its exposed surface is only one part of the installed system. Flooring on military ships covers interior accommodation, technical…
Ferry Flooring: A Project-Control Guide from Workfront Evidence to Handover
Updated September 2026 Ferry flooring is more complex than just picking carpet, vinyl, resin, synthetic teak, or anything of that sort. The specifications include service duty, substrate, every layer, drains and thresholds, installation controls, approval scope, records of acceptance, and…
Offshore Platforms: A Practical Flooring and Inspection Guide
Updated September 2026 This educational companion document is intended for the respective owners, engineering teams, shipyards, contractors, inspectors, and buyers with a technical focus. Offshore platforms are fixed, floating, or mobile marine structures used for oil and gas exploration, offshore…
Commercial Marine Flooring Guide for Shipyard Teams
Updated September 2026 Commercial marine flooring is an installed system built over the structural deck and extending beyond the visible surface. Its performance depends on the structural deck, preparation, primers or adhesives, levelling and load-spreading layers, resilient elements, finish, joints,…
Marine Resin Floor Systems: A Shipyard Guide to Selection, Installation and Acceptance
Updated September 2026 Marine resin floor systems are coordinated floor build-ups for defined vessel spaces, steel-deck conditions, service environments and acceptance routes. Beyond resin, the completed system is determined by many factors including the preparation and primers, intermediate layers, textured…
Marine Acoustic Floor Systems Guide: From Noise Path to Handover
Updated September 2026 Marine Acoustic Floor Systems are complete assemblies selected for defined vessel spaces, noise paths, operating conditions and acceptance requirements. It isn’t a single “soundproof” material. Results depend on the entire build-up and continuous control of the deck,…
Marine Floating Floor Guide: From Design Inputs to Handover
Marine flooring engineering guide Updated September 2026 Marine Floating Floor refers to an internal accommodation-deck assembly, as the term is used in this guide, where the load-bearing surface is resiliently separated from the structural steel deck and rigid boundaries. Resilient…
A Practical Marine Damping Coating Guide for Ship Noise Control
![Marine Damping Coating: Shipyard Guide [2026]](https://yibomarine.com/wp-content/uploads/2026/09/marine-damping-coating-guide-blog-featured-768x512.png)
Updated September 2026 Marine Damping Coating is a liquid-applied treatment used to change a ship panel’s vibration and sound-radiation characteristics. At this stage, a sound specification should not start with coating area or film thickness. For this guide, a sound…
![Marine PU Floor: Selection & Installation [Guide]](https://yibomarine.com/wp-content/uploads/2026/09/marine-pu-floor-blog-featured-150x150.png)