Get in touch with Yibo Company
Commercial Marine Flooring Guide for Shipyard Teams

Updated September 2026 Commercial marine flooring is an installed system built over the structural deck and extending beyond the visible surface. Its performance depends on the structural deck, preparation, primers or adhesives, levelling and load-spreading layers, resilient elements, finish, joints,…
Marine Resin Floor Systems: A Shipyard Guide to Selection, Installation and Acceptance

Updated September 2026 Marine resin floor systems are coordinated floor build-ups for defined vessel spaces, steel-deck conditions, service environments and acceptance routes. Beyond resin, the completed system is determined by many factors including the preparation and primers, intermediate layers, textured…
Marine Acoustic Floor Systems Guide: From Noise Path to Handover

Updated September 2026 Marine Acoustic Floor Systems are complete assemblies selected for defined vessel spaces, noise paths, operating conditions and acceptance requirements. It isn’t a single “soundproof” material. Results depend on the entire build-up and continuous control of the deck,…
Marine Floating Floor Guide: From Design Inputs to Handover

Marine flooring engineering guide Updated September 2026 Marine Floating Floor refers to an internal accommodation-deck assembly, as the term is used in this guide, where the load-bearing surface is resiliently separated from the structural steel deck and rigid boundaries. Resilient…
A Practical Marine Damping Coating Guide for Ship Noise Control
![Marine Damping Coating: Shipyard Guide [2026]](https://yibomarine.com/wp-content/uploads/2026/09/marine-damping-coating-guide-blog-featured-768x512.png)
Updated September 2026 Marine Damping Coating is a liquid-applied treatment used to change a ship panel’s vibration and sound-radiation characteristics. At this stage, a sound specification should not start with coating area or film thickness. For this guide, a sound…
Cruise & Passenger Vessels: A Practical Flooring Guide

Cruise & Passenger Vessels are ships that carry passengers; for flooring planning, they need documented assemblies rather than finishes chosen from a color card. Effective planning connects each space to its substrate, build-up, interfaces, evidence, installation records, acceptance owner, and…
Marine PU Floor Guide for Shipyard Selection and Site Control
![Marine PU Floor: Selection & Installation [Guide]](https://yibomarine.com/wp-content/uploads/2026/09/marine-pu-floor-blog-featured-768x512.png)
Updated September 2026 · Author: DD A marine PU floor is a polyurethane-resin floor system selected for a defined vessel area, substrate, exposure and approval route. The name defines a chemistry family. No individual layer is thereby proven suitable, watertight,…
Marine Epoxy Floor: Installation, Inspection and Repair Guide

Marine flooring field guide A marine epoxy floor is achieved once the project team controls the complete installed system: classification, substrate, preparation, materials, environment, film build, cure, inspection, and repair closure. A “marine” designation on a resin label isn’t sufficient…
How to Apply and Inspect Self-Levelling Deck Covering at Sea

Shipyard Application & Handover Guide A self levelling deck covering is not a finished floor and it is not an outdoor pedestal. On a ship, it is a construction layer in an approved floor. A reliable job starts by freezing…
Primary Deck Covering: Types, Installation, Inspection & Selection Guide

Updated September 2026 · Author: DD Primary deck covering is the base layer of a ship’s floor build-up, installed in direct contact with the deck plating. Depending on the applicable system, that definition can also encompass a primer, anticorrosive compound,…




![Marine PU Floor: Selection & Installation [Guide]](https://yibomarine.com/wp-content/uploads/2026/09/marine-pu-floor-blog-featured-150x150.png)